Peumatic Grouting pump is designed for strain and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes so as to reinforce the loose rock mass. The maximum grain size can’t exceed zero.2 mm.
Grouting pump operation and maintenance is straightforward, safe and reliable. This pump is utilized in mines operating under tough conditions because it is reliable and explosion-proof.
เกจวัดแรงดันsumo include: An air inlet, the pneumatic cylinder, mounting base body and stand, strain gauge, pumping cylinder, outlet with fast release coupling and wheels.
How it works
Pneumatic strain in the air cylinder exerts a excessive pressure on the grout combination which ends up in ejection of grout with a excessive strain and velocity. The valves of the air cylinder within the pump operate mechanically to actuate the cylinder. The pneumatic cylinder then moves the plunger up and down to complete the pumping cycle.
Pneumatic grout pump can be driven even with out Electrical power supply in distant areas through the use of engine driven compressor.
Applications
The pump is majorly utilized in construction and mining industry for injecting materials into extensive and medium size hole in beams, columns ,basement walls and flooring, lift shaft concrete wall fill-up etc. In mining business it is used to replenish cement resolution the place there’s a hole exists between structure and rock and for soil stabilization.
เกจวัดแรงดันน้ำราคา tends to simple upkeep and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is broadly used in tunnels, coal mine, bridges and dams, constructing basis, and different underground tasks, and inflammable, explosive sites and different dangerous surroundings.
It has application in chemical business additionally to pump out chemical slurries.
The pump is electricity free so, can be utilized at any site situation whether it’s rural or city.
Mining Pneumatic Grouting pump has a larger discharge slurry adjustment range. Generally the ultimate quantity of the grouting volume is 8 or10 occasions of the quantity in the beginning. And the ultimate grouting quantity proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specifically designed for high-pressure grouting. And it adopts full hydraulic drive, it’s strain and flow can be adjusted based on the requirements of grouting,(The flow of grouting pump is 0-100L/min, strain of discharge is 0-10MPa).apart from, This Pneumatic high-pressure grouting pump can be utilized for grouting single or double fluid.
High-pressure grouting pump is principally used for highways, railways, water and electrical energy, building, mining etc. ground/underground building.
Benefits
Mining Pneumatic Grouting pump has the advantages of low power consumption, small vibration, low noise, small measurement, excessive efficiency, dependable efficiency, stress and move management, lengthy life and so forth. Common mine grouting pump has pneumatic injection pump, twin fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can be Light weight and with a wheelie design it can be carried easily. It is designed for simple operation and low maintenance. Last however not least its spare parts are easily obtainable.
Share