Peumatic Grouting pump is designed for pressure and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes in order to reinforce the free rock mass. The most grain dimension can’t exceed 0.2 mm.
Grouting pump operation and maintenance is simple, secure and dependable. This pump is utilized in mines working beneath difficult circumstances as a outcome of it’s reliable and explosion-proof.
Basic Pneumatic Grouting pump embrace: An air inlet, the pneumatic cylinder, mounting base frame and stand, strain gauge, pumping cylinder, outlet with quick launch coupling and wheels.
How it really works
Pneumatic stress in the air cylinder exerts a high pressure on the grout mixture which results in ejection of grout with a high pressure and velocity. The valves of the air cylinder within the pump perform mechanically to actuate the cylinder. The pneumatic cylinder then strikes the plunger up and down to complete the pumping cycle.
Pneumatic grout pump may be driven even with out Electrical energy supply in distant areas through the use of engine pushed compressor.
เกจวัดแรงดันแก๊สอาร์กอน is majorly used in building and mining trade for injecting materials into broad and medium size gap in beams, columns ,basement walls and flooring, raise shaft concrete wall fill-up and so on. In mining เครื่องมือที่ใช้ในการวัดความดัน is used to replenish cement resolution the place there is a gap exists between structure and rock and for soil stabilization.
Detachable design tends to easy maintenance and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is broadly utilized in tunnels, coal mine, bridges and dams, constructing basis, and other underground tasks, and inflammable, explosive sites and different dangerous setting.
It has software in chemical business also to pump out chemical slurries.
The pump is electrical energy free so, can be used at any web site situation whether or not it is rural or urban.
Mining Pneumatic Grouting pump has a bigger discharge slurry adjustment range. Generally the final amount of the grouting volume is eight or10 instances of the quantity in the beginning. And the final grouting amount proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specially designed for high-pressure grouting. And it adopts full hydraulic drive, it’s strain and move could be adjusted in accordance with the necessities of grouting,(The circulate of grouting pump is 0-100L/min, pressure of discharge is 0-10MPa).apart from, This Pneumatic high-pressure grouting pump can be utilized for grouting single or double fluid.
High-pressure grouting pump is mainly used for highways, railways, water and electrical energy, building, mining and so on. ground/underground building.
Benefits
Mining Pneumatic Grouting pump has the advantages of low power consumption, small vibration, low noise, small dimension, excessive effectivity, reliable efficiency, pressure and move control, lengthy life and so on. Common mine grouting pump has pneumatic injection pump, twin fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can also be Light weight and with a wheelie design it can be carried simply. It is designed for simple operation and low upkeep. Last but not least its spare parts are easily available.
Share