ไดอะแฟรม of the pump itself was a significant breakthrough for mankind. It significantly simplified the supply of drinking water. With growing demands for a well balanced water supply, largely free from pressure fluctuations, and at exactly the same time increasing demands on the energy efficiency of buildings, pumps are actually making their contribution as booster pumps. What their task is, how they function and what pressure switches do along the way is explained briefly and succinctly on this page.
What exactly are booster pumps necessary for?
A booster pump increases low water pressure and, with that, improves the flow rate. It provides an extra boost to create the water pressure to the desired level. Booster pumps are often used in pipelines to improve the pressure and so to go the liquid along to another pump, and also for pumping in residential houses or large commercial buildings. An expansion vessel can extend a pressure booster system. By using pressure gauge 10 bar , the water pressure is likewise stabilised and thus improved.
Booster pumps in operation
The figure gives an overview of the various measuring points inside a pressure booster system:
1 Input pressure ? Pressure
2a Dry run protection ? Pressure
2b Dry run protection ? Level
3 Output pressure ? Pressure
4 Pump performance ? Differential pressure
So how exactly does a booster pump work?
Booster pumps are selected predicated on application demands. Instead of selecting one large pump, consider selecting multiple pumps with smaller horsepower. Booster pumps have an impeller that moves water that comes in through the inlet and exits through the outlet. A motor makes the impellers spin. The pumps differ in how they draw the water in and push it out. Many of them work with a spinning propeller, others use an oscillating diaphragm or other pump principles.
What do mechanical pressure switches in booster pumps do?
The mechanical pressure switches in booster pumps are used for the direct control/monitoring of safety functions so that you can protect pumps with insufficient input pressure against dry running. A good example of this can be a WIKA PSM-520 pressure switch.
How do digital pressure gauge work?
The pressure component of the switch is really a resilient bellow which works against a spring mechanism with an adjustable pre-load force. On the spring mechanism you will find a contact arm for actuating the change-over switch contact. The switch is actuated as soon as the force generated by the pressure in the pressure element is greater than the set pre-load force.
Note
Further information on the various measurement solutions which we offer you for pumps and systems are available on the WIKA website. In case you have any questions, your contact will gladly help you.
Also read our articles
Mechanical pressure switches: How does one set the switch point?
Mechanical vs. electronic pressure switches: Functionality
Further blogs on mechanical pressure switches